Skip to content

Leather Key Cases: Key Size, Hooks and Closure Clearance

A leather key case needs to accommodate more than a number of keys. The attachment, the shape of each key head and the space needed for the cover to close all affect the finished arrangement. Start with the keys you actually carry, including any bulky fob, rather than treating a hook count as a fit guarantee.

Read hook count as an attachment layout

The Ettinger Sterling 6-Hook Key Case lists six hooks and closed dimensions of 10.4 × 1.3 × 7.1 cm. It also includes a coin compartment, slip pockets and an outside card pocket. These details describe the case’s layout and closed size. They do not establish a maximum key length or show that every hook and pocket can be filled with any combination of contents.

For a hook-based case, ask how the key is attached and where it hangs relative to the cover. A key on an added split ring may sit differently from a key attached directly to the intended hook. Record the ring as part of the arrangement; do not overlook it when comparing the key tip with the edge of the case.

Measure the key and identify the reference point

The bow is the head of the key that you hold. Its width, thickness and attachment hole matter separately from the blade’s reach. A plastic-covered bow can occupy a different space from a flat metal head even when the keys have a similar overall length.

Use the following details when asking a maker whether your keys will fit. These are editorial observation points, not universal size limits:

DetailWhat to record
Key lengthState whether you measured the complete key or from the attachment-hole centre to the tip. Include the maker’s requested measurement if different.
Head and holeRecord the head’s width and thickness, any plastic cover, and the opening through which the attachment must pass.
Hook or added ringIdentify the intended attachment and any extra ring that changes where the key sits.
Closed arrangementNote key tips, overlapping heads and other contents near the fold, flap, zip or snap.

The outside length of a closed case is not the same measurement as the available space below a mounted hook. If the seller only supplies exterior dimensions, request a compatible-key specification or a clear internal view rather than inventing a clearance allowance.

Keep hook cases and stacked organisers distinct

Orbitkey’s organiser chooser describes keys folding into a stack and gives compatibility conditions involving a relatively flat profile, the attachment-hole opening and length measured from that hole. It also provides a D-ring position for car keys, fobs and bulkier items. This is a different arrangement from keys hanging on separate hooks inside a folding case.

Use the instructions for the exact organiser and version. A key count for a stacked system does not transfer to a six-hook case, and the dimensions for one mechanism do not establish what another hook can accept. If an attachment will not pass through the key’s opening, ask about a compatible solution before altering either component.

Check closure with the intended contents

  1. Identify the case model and its attachment instructions. Begin with the empty case so that you know how its cover and fastener normally meet.
  2. Attach each key using the intended method. Check that the attachment returns to its proper closed position and that the key can move as the design requires.
  3. Arrange the keys and add only the other contents you intend to carry in designated pockets. Check whether key heads overlap, tips protrude or an item lies across the closure route.
  4. Close gently and reopen. If a key must be forced aside, the cover bows markedly or the fastener needs pressure to reach, remove the conflicting item and reassess the arrangement.

Check accessible lining around key tips, attachment plates and fasteners. The linings and zip-guards guide explains how to describe those contact points. Extra coins or cards also belong in the fit record; see wallet layout and capacity for keeping a pocket count separate from the load actually carried.

Describe what remains outside the cover

A fob on an external ring is attached to the case but is not enclosed by it. Include that exposed item when describing pocket bulk and contact with a phone or other accessory. A tidy closed cover alone does not establish scratch protection for everything carried beside it.

Sources and scope: The manufacturer pages were reviewed on 17 October 2026. The table and checking sequence are editorial guidance; no case was loaded or tested for this article. The examples establish no original specifications for historical Möhel products. Continue in belts, wallets and key cases.