A curved-end leather strap does not automatically sit flush against a round watch case. The visible leather outline, the shape of the spring bar and the position of the receiving holes all matter. Start by identifying which construction the maker means, then check it against the exact watch rather than selecting by appearance alone.
Separate the strap outline from the spring bar
Artisan Straps’ curved-end options distinguish ends made for curved spring bars from a curved-end option using straight spring bars for watches with long lugs. The maker also states that curved ends do not necessarily sit flush with the case. Its options show why the leather outline and the bar shape need separate entries in a fit enquiry.
Delugs’ 2021 curved-strap guide describes its curved straps as leather formed around curved spring bars without an additional insert. It distinguishes these from straps using an insert shaped for a particular watch model. This is a useful construction distinction, but the terminology should stay attached to the maker’s explanation.
Ask whether the proposed strap contains a shaped insert, which bar it requires and which watch references it is intended to fit. A front photograph may show the outer curve while leaving the bar channel and any concealed insert unresolved.
Do not treat a smaller gap as proof of fit
In the construction described by Delugs, the distance from the bar to the strap tip remains unchanged when switching from a straight to a curved bar. Its examples show that a curved strap can leave a larger case gap when the receiving holes remain in a position suited to the straight arrangement. “Curved” therefore does not mean “gap-filling”.
Describe the visible gap and any contact separately. A space that looks large in a face-on photograph may simply be a styling concern; an end that catches or rubs as it moves raises a different question. Record where contact occurs and ask the maker whether that movement is intended for the proposed combination.
Avoid choosing an arbitrary millimetre target for every watch. The aim is a confirmed attachment and suitable movement, with an appearance you accept. Adding bulk solely to hide a gap still leaves the resulting clearance to be checked.
Check the exact watch reference
A manufacturer example shows why a brand-wide rule is too broad. MING’s 17.03 GMT Burgundy archive describes reprofiled, lengthened lugs and identifies both its curved-pin strap arrangement and compatibility with standard 20 mm straight-end straps. That statement concerns the 17.03 design; it should not be extended to every MING reference.
Save the exact watch reference alongside the proposed strap model and end option. If a supplier lists a family name without the particular version, ask for clarification. The case diameter alone leaves the attachment geometry unresolved, while the lug-width and buckle-fit guide covers the separate width measurements.
For a watch using a proprietary connector, fixed bar or screw-secured attachment, establish the intended connection before applying guidance about ordinary spring bars. A curved leather outline does not identify or replace that connection.
Record the complete attachment before changing parts
| Record | Useful detail | Question to resolve |
|---|---|---|
| Watch | Exact reference and original attachment. | Which end and bar arrangement is intended for this case? |
| Strap end | Outline, local thickness and any documented insert. | What occupies the space between the lugs and case? |
| Spring bar | Specified model, shape and labelled dimensions. | Does the maker approve it for this strap and watch? |
| Movement and access | Visible contact points and the removal method. | Can the correctly fitted end move and be serviced as intended? |
- Save the watch reference and the proposed strap’s end-option description, including any model-specific compatibility statement.
- Photograph accessible front and side views of the existing arrangement. Note visible gaps or contact without dismantling it solely for a photograph.
- Ask the supplier or watchmaker to confirm the strap end, spring bar and case together, including fitting and later removal.
- After confirmed fitting, record any unexpected catching or rubbing during ordinary movement. Stop using an insecure attachment and have it checked.
Do not bend a bar, drill a lug or carve an existing strap end to make an unconfirmed combination fit. The quick-release guide covers bar bodies, tips and control access. Use the strap-profile guide when the unresolved detail is local thickness.
Sources and scope
The strap-maker references and MING archive were reviewed on 19 October 2026. Named constructions and compatibility statements belong to their cited examples. The table and enquiry sequence are editorial guidance. No strap was fitted or retention-tested, no universal clearance is specified, and these sources do not identify the construction of a historical Möhel accessory.
Continue in watch straps and storage guides.